The Global Leader In Viscosity For Over 75 Years
Brookfield AMETEK



Simple QC test required for the assessment of marmalade consistency.

Test Objective

To evaluate the gel structure and consistency of marmalade and French raspberry jam.


The products supplied were totally free flowing at ambient temperature. Each contained particulate fruit pieces however these pieces were very small and not considered to affect results. Back extrusion using jar the product was supplied in and a 38 mm diameter cylinder probe with shallow gradient to base was used. Probe travels to sample surface and instrument is triggered at set load. Probe then travels into sample where load rapidly increases initially followed by plateau of loads as critical yield stress is reached and product begins flow.


Jam sample was simply located centrally beneath test probe at ambient temperature of 22C. The test probe was driven into the sample following conditions given and the samples response evaluated.

Graphical Interpretation

Click to enlarge

Parameters of Interest


Click to enlarge

Click to enlarge


A clear difference between the two jam samples can be observed through all of the core parameters selected. The test provides an objective means to quantify the subjective puree type consistency. The differences are primarily reflected by the differences in energy input to reach the 30 mm penetration whilst the Hardness value directly relates to the Gel strength of the product. The adhesiveness parameters provide an indication of how the sample adheres to the test probe. Primarily this is related to the gel strength where the harder gels create a void as the sample is displaced during the compression cycle. During retraction of the probe this essentially creates a vacuum between the probe/ sample interface and thus must be considered as an indicator of sample adhesion.